Net::POP3 - Post Office Protocol 3 Client class (RFC1939)
use Net::POP3;
# Constructors
$pop = Net::POP3->new('pop3host');
$pop = Net::POP3->new('pop3host', Timeout => 60);
$pop = Net::POP3->new('pop3host', SSL => 1, Timeout => 60);
if ($pop->login($username, $password) > 0) {
my $msgnums = $pop->list; # hashref of msgnum => size
foreach my $msgnum (keys %$msgnums) {
my $msg = $pop->get($msgnum);
print @$msg;
$pop->delete($msgnum);
}
}
$pop->quit;
This module implements a client interface to the POP3 protocol, enabling
a perl5 application to talk to POP3 servers. This documentation assumes
that you are familiar with the POP3 protocol described in RFC1939.
With the IO::Socket::SSL manpage installed it also provides support for implicit and
explicit TLS encryption, i.e. POP3S or POP3+STARTTLS.
A new Net::POP3 object must be created with the new method. Once
this has been done, all POP3 commands are accessed via method calls
on the object.
The Net::POP3 class is a subclass of Net::Cmd and (depending on avaibility) of
IO::Socket::IP, IO::Socket::INET6 or IO::Socket::INET.
- new ( [ HOST ] [, OPTIONS ] )
-
This is the constructor for a new Net::POP3 object.
HOST is the
name of the remote host to which an POP3 connection is required.
HOST is optional. If HOST is not given then it may instead be
passed as the Host option described below. If neither is given then
the POP3_Hosts specified in Net::Config will be used.
OPTIONS are passed in a hash like fashion, using key and value pairs.
Possible options are:
Host - POP3 host to connect to. It may be a single scalar, as defined for
the PeerAddr option in the IO::Socket::INET manpage, or a reference to
an array with hosts to try in turn. The host method will return the value
which was used to connect to the host.
Port - port to connect to.
Default - 110 for plain POP3 and 995 for POP3s (direct SSL).
SSL - If the connection should be done from start with SSL, contrary to later
upgrade with starttls .
You can use SSL arguments as documented in the IO::Socket::SSL manpage, but it will
usually use the right arguments already.
LocalAddr and LocalPort - These parameters are passed directly
to IO::Socket to allow binding the socket to a specific local address and port.
For compatibility with older versions ResvPort can be used instead of
LocalPort.
Domain - This parameter is passed directly to IO::Socket and makes it
possible to enforce IPv4 connections even if the IO::Socket::IP manpage is used as super
class. Alternatively Family can be used.
Timeout - Maximum time, in seconds, to wait for a response from the
POP3 server (default: 120)
Debug - Enable debugging information
Unless otherwise stated all methods return either a true or false
value, with true meaning that the operation was a success. When a method
states that it returns a value, failure will be returned as undef or an
empty list.
Net::POP3 inherits from Net::Cmd so methods defined in Net::Cmd may
be used to send commands to the remote POP3 server in addition to the methods
documented here.
- host ()
-
Returns the value used by the constructor, and passed to IO::Socket::INET,
to connect to the host.
- auth ( USERNAME, PASSWORD )
-
Attempt SASL authentication.
- user ( USER )
-
Send the USER command.
- pass ( PASS )
-
Send the PASS command. Returns the number of messages in the mailbox.
- login ( [ USER [, PASS ]] )
-
Send both the USER and PASS commands. If
PASS is not given the
Net::POP3 uses Net::Netrc to lookup the password using the host
and username. If the username is not specified then the current user name
will be used.
Returns the number of messages in the mailbox. However if there are no
messages on the server the string "0E0" will be returned. This is
will give a true value in a boolean context, but zero in a numeric context.
If there was an error authenticating the user then undef will be returned.
- starttls ( SSLARGS )
-
Upgrade existing plain connection to SSL.
You can use SSL arguments as documented in the IO::Socket::SSL manpage, but it will
usually use the right arguments already.
- apop ( [ USER [, PASS ]] )
-
Authenticate with the server identifying as
USER with password PASS .
Similar to login, but the password is not sent in clear text.
To use this method you must have the Digest::MD5 or the MD5 module installed,
otherwise this method will return undef.
- banner ()
-
Return the sever's connection banner
- capa ()
-
Return a reference to a hash of the capabilities of the server. APOP
is added as a pseudo capability. Note that I've been unable to
find a list of the standard capability values, and some appear to
be multi-word and some are not. We make an attempt at intelligently
parsing them, but it may not be correct.
- capabilities ()
-
Just like capa, but only uses a cache from the last time we asked
the server, so as to avoid asking more than once.
- top ( MSGNUM [, NUMLINES ] )
-
Get the header and the first
NUMLINES of the body for the message
MSGNUM . Returns a reference to an array which contains the lines of text
read from the server.
- list ( [ MSGNUM ] )
-
If called with an argument the
list returns the size of the message
in octets.
If called without arguments a reference to a hash is returned. The
keys will be the MSGNUM 's of all undeleted messages and the values will
be their size in octets.
- get ( MSGNUM [, FH ] )
-
Get the message
MSGNUM from the remote mailbox. If FH is not given
then get returns a reference to an array which contains the lines of
text read from the server. If FH is given then the lines returned
from the server are printed to the filehandle FH .
- getfh ( MSGNUM )
-
As per get(), but returns a tied filehandle. Reading from this
filehandle returns the requested message. The filehandle will return
EOF at the end of the message and should not be reused.
- last ()
-
Returns the highest
MSGNUM of all the messages accessed.
- popstat ()
-
Returns a list of two elements. These are the number of undeleted
elements and the size of the mbox in octets.
- ping ( USER )
-
Returns a list of two elements. These are the number of new messages
and the total number of messages for
USER .
- uidl ( [ MSGNUM ] )
-
Returns a unique identifier for
MSGNUM if given. If MSGNUM is not
given uidl returns a reference to a hash where the keys are the
message numbers and the values are the unique identifiers.
- delete ( MSGNUM )
-
Mark message
MSGNUM to be deleted from the remote mailbox. All messages
that are marked to be deleted will be removed from the remote mailbox
when the server connection closed.
- reset ()
-
Reset the status of the remote POP3 server. This includes resetting the
status of all messages to not be deleted.
- quit ()
-
Quit and close the connection to the remote POP3 server. Any messages marked
as deleted will be deleted from the remote mailbox.
- can_inet6 ()
-
Returns whether we can use IPv6.
- can_ssl ()
-
Returns whether we can use SSL.
If a Net::POP3 object goes out of scope before quit method is called
then the reset method will called before the connection is closed. This
means that any messages marked to be deleted will not be.
the Net::Netrc manpage,
the Net::Cmd manpage,
the IO::Socket::SSL manpage
Graham Barr <gbarr@pobox.com>.
Steve Hay <shay@cpan.org> is now maintaining libnet as of version
1.22_02.
Copyright (C) 1995-2004 Graham Barr. All rights reserved.
Copyright (C) 2013-2016 Steve Hay. All rights reserved.
This module is free software; you can redistribute it and/or modify it under the
same terms as Perl itself, i.e. under the terms of either the GNU General Public
License or the Artistic License, as specified in the LICENCE file.
|